Ultra Wide Bandwidth HDTV 8 x 4 Matrix Switch
Any Remote Control or RS-232
Back panel image
Back panel diagram
Ever wished you could view full quality HDTV throughout your
house without a closet full of equipment in every room? CMX84 integrates
everything you need to distribute all your HDTV video and audio sources to all
the displays throughout your home.
CMX84 is the most feature rich high performance matrix switch
on the the market. We support more signal types than the competition.
The CMX84 has the following features
Flexible control options
CMX84 can be controlled by several methods, you can choose the
one the best fits your home theater control scheme.
Each output is individually switch-able. You can
configure CMX84 in one of 2 control modes:
Audio volume control
The CMX84 integrates fully independent input and output volume
adjustments on analog stereo audio using the best quality Burr-Brown line level
amplifiers. Why is this important?
The input volume control allows you to equalize the volume
from all sources to a common level. Many satellite boxes output volume
levels below nominal, so without this feature you would need to adjust the
volume manually every time you switch between Cable/DVD to satellite.
After equalization, all your sources will have the same volume level.
The output volume control is mainly used for two types of
applications. The first is to control the volume on your TV speakers from
the centralized system. It eliminates the need to use the TV remote to
control volume. The second application is for in wall/ceiling speakers.
Since volume control is built into the CMX, you can use inexpensive and high
quality fixed gain multichannel power amplifiers to drive your speakers.
Not only does this simplify control, but it will save you several hundred
dollars on the total solution.
CMX84 is the ideal amplifier for driving long video cables in
your home. Many vendors claim their products can do this, but very few can
accomplish this without distortion of the video. The most important
amplifier design factors in driving long cables are source impedance matching,
output connector quality, amplifier bandwidth, and amplifier current drive and
slew rate. Our amplifier uses the best components for all these, resulting
in the best signal distribution you can get.
The remote control interface can use ZeroKey
infrared code cloning to map any remote control key to each of the inputs &
outputs. ZeroKey technology is compatible with virtually all remote
controls, and does not interfere with the normal operation of the remote.
Please see our quick start guide
for a description of how to program for an IR remote using ZeroKey.
ZeroKey programming is stored in flash memory, and you will
not need to reprogram even if you lose power. If you buy a new remote in
the future, don't worry, the CMX84 can be reprogrammed as much as you like.
Online manual (word document)
Quick setup guide (word document)
IR remote programming
CMX86 family coupling change
Stream direct to Android