Video StormCMX1616AV (Advanced2, v2.7) [Serial]Video StormVideo Storm CMX1616AV (Advanced2, v2.7) [Serial]devices_sm/KnoxRS8x8HB.GIFdevices_lg/KnoxRS8x8HB.GIF12/26/2008 5:35:35 PM11/4/2011 2:03:03 PMlua_genDriverWorks avswitch serial False True False True True True True True True 0 9600 8 none 1 none 232 16 16 32 32 True Version 2.7, will work for firmware 2.7 or higher \n \n CMX1616A and CMX1616V driver \n Supports independant audio and video switching. Full volume control supported.\n For use with BOTH CMX1616A and CMX1616V\n Digital audio switching supported on CMX1616A\n Digital audio is supported via the CVBX channels\n All digital audio ports (center jacks) are setup to transcode only\n Toslink out 1-6 will transcode statically from Coax in 1-6\n Coax out 1-6 will transcode statically from Toslink in 1-6\n Connect control RS232 from C4 to CMX1616A\n Connect another rs232 cable from 16A XP port to 16V control port\n \n Driver setup PLEASE READ!\n 1. MUST use version 2.7 or higher CMX firmware 3. The Video, Audio selection and volume properties are READ ONLY states 4. The Max and Min volume limits should be configured to your preference (to avoid clipping) 5. To use volume control, connect the CMX room volume control to your volume endpoint 6. Make sure you fully connect all the "connections" used to both inputs AND outputs for VIDEO 7. Make sure you fully connect all the "connections" used to both inputs AND outputs for AUDIO 8. You must paste the following into in the LUA comman window, then click execute ExecuteCommand("Configure_switch") This will setup the static transcoding and save it as the power on default 9. You can also paste the following into in the LUA comman window, then click execute ExecuteCommand("Read_status") This will readback from the switch. Check the properties tab next and verify that Readback config status = OK 11. The "Enable zone powerdown" property will automatically powerdown each output zone when not in use. 12. If desired, you can adjust the INPUT volume levels on the PROPERTIES page. 128 = Nominal volume (no adjustment) 196 = Volume boosted by 50% 64 = Volume attenuated by 50% Make sure your output volume setting is nominal, and adjust each input volume setting so that each source is roughly the same volume level. 13. C4 ramp speed sets how fast the Control4 ramp function executes (in ms) 14. Internal ramp speed sets how fast the CMX will move between volume levels. 3 is default, 6 slowest and 0 fastest. \n\n Additional Commands\n Read_status: This will poll the CMX to get the device status and update all properties. Normally this is not needed since the FP and IR are locked, but can be a useful debug tool. The Readback config status and Readback avsync status properties are set by this command. They will transition from CurrentState => waiting => OK or ERROR or TIMEOUT. OK means functioning properly. TIMEOUT means no response from CMX. ERROR on config status means the device config is incorrect. ERROR on avsync status probably means the FP/IR lockout was not engaged. \n Set_vol_nom: This will set all output volume controls to nominal. Use this if not using volume adjustment. Generally you will want to setup this to trigger on the project load event\n For support in using this driver or to report an issue, contact videostorm@gmail.com\n Input volume 1 RANGED_INTEGER 0 255 128 false Input volume 2 RANGED_INTEGER 0 255 128 false Input volume 3 RANGED_INTEGER 0 255 128 false Input volume 4 RANGED_INTEGER 0 255 128 false Input volume 5 RANGED_INTEGER 0 255 128 false Input volume 6 RANGED_INTEGER 0 255 128 false Input volume 7 RANGED_INTEGER 0 255 128 false Input volume 8 RANGED_INTEGER 0 255 128 false Input volume 9 RANGED_INTEGER 0 255 128 false Input volume 10 RANGED_INTEGER 0 255 128 false Input volume 11 RANGED_INTEGER 0 255 128 false Input volume 12 RANGED_INTEGER 0 255 128 false Input volume 13 RANGED_INTEGER 0 255 128 false Input volume 14 RANGED_INTEGER 0 255 128 false Input volume 15 RANGED_INTEGER 0 255 128 false Input volume 16 RANGED_INTEGER 0 255 128 false Volume Max RANGED_INTEGER 0 255 200 false Volume Min RANGED_INTEGER 0 255 0 false C4 ramp speed RANGED_INTEGER 50 1000 200 false Internal ramp speed RANGED_INTEGER 0 6 3 false Enable zone powerdown LIST On Off Off false Readback config status LIST OK WAITING TIMEOUT ERROR OK true Readback AV sync status LIST OK WAITING TIMEOUT ERROR OK true Video select 1 RANGED_INTEGER 0 16 0 true Video select 2 RANGED_INTEGER 0 16 0 true Video select 3 RANGED_INTEGER 0 16 0 true Video select 4 RANGED_INTEGER 0 16 0 true Video select 5 RANGED_INTEGER 0 16 0 true Video select 6 RANGED_INTEGER 0 16 0 true Video select 7 RANGED_INTEGER 0 16 0 true Video select 8 RANGED_INTEGER 0 16 0 true Video select 9 RANGED_INTEGER 0 16 0 true Video select 10 RANGED_INTEGER 0 16 0 true Video select 11 RANGED_INTEGER 0 16 0 true Video select 12 RANGED_INTEGER 0 16 0 true Video select 13 RANGED_INTEGER 0 16 0 true Video select 14 RANGED_INTEGER 0 16 0 true Video select 15 RANGED_INTEGER 0 16 0 true Video select 16 RANGED_INTEGER 0 16 0 true Audio select 1 RANGED_INTEGER 0 16 0 true Audio select 2 RANGED_INTEGER 0 16 0 true Audio select 3 RANGED_INTEGER 0 16 0 true Audio select 4 RANGED_INTEGER 0 16 0 true Audio select 5 RANGED_INTEGER 0 16 0 true Audio select 6 RANGED_INTEGER 0 16 0 true Audio select 7 RANGED_INTEGER 0 16 0 true Audio select 8 RANGED_INTEGER 0 16 0 true Audio select 9 RANGED_INTEGER 0 16 0 true Audio select 10 RANGED_INTEGER 0 16 0 true Audio select 11 RANGED_INTEGER 0 16 0 true Audio select 12 RANGED_INTEGER 0 16 0 true Audio select 13 RANGED_INTEGER 0 16 0 true Audio select 14 RANGED_INTEGER 0 16 0 true Audio select 15 RANGED_INTEGER 0 16 0 true Audio select 16 RANGED_INTEGER 0 16 0 true Volume 1 RANGED_INTEGER 0 100 0 true Volume 2 RANGED_INTEGER 0 100 0 true Volume 3 RANGED_INTEGER 0 100 0 true Volume 4 RANGED_INTEGER 0 100 0 true Volume 5 RANGED_INTEGER 0 100 0 true Volume 6 RANGED_INTEGER 0 100 0 true Volume 7 RANGED_INTEGER 0 100 0 true Volume 8 RANGED_INTEGER 0 100 0 true Volume 9 RANGED_INTEGER 0 100 0 true Volume 10 RANGED_INTEGER 0 100 0 true Volume 11 RANGED_INTEGER 0 100 0 true Volume 12 RANGED_INTEGER 0 100 0 true Volume 13 RANGED_INTEGER 0 100 0 true Volume 14 RANGED_INTEGER 0 100 0 true Volume 15 RANGED_INTEGER 0 100 0 true Volume 16 RANGED_INTEGER 0 100 0 true Mute 1 LIST On Off Off true Mute 2 LIST On Off Off true Mute 3 LIST On Off Off true Mute 4 LIST On Off Off true Mute 5 LIST On Off Off true Mute 6 LIST On Off Off true Mute 7 LIST On Off Off true Mute 8 LIST On Off Off true Mute 9 LIST On Off Off true Mute 10 LIST On Off Off true Mute 11 LIST On Off Off true Mute 12 LIST On Off Off true Mute 13 LIST On Off Off true Mute 14 LIST On Off Off true Mute 15 LIST On Off Off true Mute 16 LIST On Off Off true Balance 1 RANGED_INTEGER 0 100 50 true Balance 2 RANGED_INTEGER 0 100 50 true Balance 3 RANGED_INTEGER 0 100 50 true Balance 4 RANGED_INTEGER 0 100 50 true Balance 5 RANGED_INTEGER 0 100 50 true Balance 6 RANGED_INTEGER 0 100 50 true Balance 7 RANGED_INTEGER 0 100 50 true Balance 8 RANGED_INTEGER 0 100 50 true Balance 9 RANGED_INTEGER 0 100 50 true Balance 10 RANGED_INTEGER 0 100 50 true Balance 11 RANGED_INTEGER 0 100 50 true Balance 12 RANGED_INTEGER 0 100 50 true Balance 13 RANGED_INTEGER 0 100 50 true Balance 14 RANGED_INTEGER 0 100 50 true Balance 15 RANGED_INTEGER 0 100 50 true Balance 16 RANGED_INTEGER 0 100 50 true Debug Mode LIST Off Print Log Print and Log Off false Read_status Read device status over RS232 Set_vol_nom Set all audio volumes to nominal Configure_switch Send switch config commands 5001 1 AVSWITCH 2 False False AVSWITCH 1 1 Serial RS-232 1 True True RS_232 2000 1 OUTPUT 1 5 False True COMPONENT 1000 1 INPUT 1 5 True True COMPONENT 2010 1 OUTPUT 2 5 False True COMPONENT 1010 1 INPUT 2 5 True True COMPONENT 2020 1 OUTPUT 3 5 False True COMPONENT 1020 1 INPUT 3 5 True True COMPONENT 2030 1 OUTPUT 4 5 False True COMPONENT 1030 1 INPUT 4 5 True True COMPONENT 2040 1 OUTPUT 5 5 False True COMPONENT 1040 1 INPUT 5 5 True True COMPONENT 2050 1 OUTPUT 6 5 False True COMPONENT 1050 1 INPUT 6 5 True True COMPONENT 2060 1 OUTPUT 7 5 False True COMPONENT 1060 1 INPUT 7 5 True True COMPONENT 2070 1 OUTPUT 8 5 False True COMPONENT 1070 1 INPUT 8 5 True True COMPONENT 2080 1 OUTPUT 9 5 False True COMPONENT 1080 1 INPUT 9 5 True True COMPONENT 2090 1 OUTPUT 10 5 False True COMPONENT 1090 1 INPUT 10 5 True True COMPONENT 2100 1 OUTPUT 11 5 False True COMPONENT 1100 1 INPUT 11 5 True True COMPONENT 2110 1 OUTPUT 12 5 False True COMPONENT 1110 1 INPUT 12 5 True True COMPONENT 2120 1 OUTPUT 13 5 False True COMPONENT 1120 1 INPUT 13 5 True True COMPONENT 2130 1 OUTPUT 14 5 False True COMPONENT 1130 1 INPUT 14 5 True True COMPONENT 2140 1 OUTPUT 15 5 False True COMPONENT 1140 1 INPUT 15 5 True True COMPONENT 2150 1 OUTPUT 16 5 False True COMPONENT 1150 1 INPUT 16 5 True True COMPONENT 4000 1 OUTPUT 1 6 False True DIGITAL_COAX 4002 1 OUTPUT 1 6 False True STEREO 3000 1 INPUT 1 6 True True DIGITAL_COAX 3002 1 INPUT 1 6 True True STEREO 7000 1 Room Selection - OUTPUT 1 7 False True AUDIO_VOLUME 4010 1 OUTPUT 2 6 False True DIGITAL_COAX 4012 1 OUTPUT 2 6 False True STEREO 3010 1 INPUT 2 6 True True DIGITAL_COAX 3012 1 INPUT 2 6 True True STEREO 7010 1 Room Selection - OUTPUT 2 7 False True AUDIO_VOLUME 4020 1 OUTPUT 3 6 False True DIGITAL_COAX 4022 1 OUTPUT 3 6 False True STEREO 3020 1 INPUT 3 6 True True DIGITAL_COAX 3022 1 INPUT 3 6 True True STEREO 7020 1 Room Selection - OUTPUT 3 7 False True AUDIO_VOLUME 4030 1 OUTPUT 4 6 False True DIGITAL_COAX 4032 1 OUTPUT 4 6 False True STEREO 3030 1 INPUT 4 6 True True DIGITAL_COAX 3032 1 INPUT 4 6 True True STEREO 7030 1 Room Selection - OUTPUT 4 7 False True AUDIO_VOLUME 4040 1 OUTPUT 5 6 False True DIGITAL_COAX 4042 1 OUTPUT 5 6 False True STEREO 3040 1 INPUT 5 6 True True DIGITAL_COAX 3042 1 INPUT 5 6 True True STEREO 7040 1 Room Selection - OUTPUT 5 7 False True AUDIO_VOLUME 4050 1 OUTPUT 6 6 False True DIGITAL_COAX 4052 1 OUTPUT 6 6 False True STEREO 3050 1 INPUT 6 6 True True DIGITAL_COAX 3052 1 INPUT 6 6 True True STEREO 7050 1 Room Selection - OUTPUT 6 7 False True AUDIO_VOLUME 4060 1 OUTPUT 7 6 False True DIGITAL_COAX 4062 1 OUTPUT 7 6 False True STEREO 3060 1 INPUT 7 6 True True DIGITAL_COAX 3062 1 INPUT 7 6 True True STEREO 7060 1 Room Selection - OUTPUT 7 7 False True AUDIO_VOLUME 4070 1 OUTPUT 8 6 False True DIGITAL_COAX 4072 1 OUTPUT 8 6 False True STEREO 4080 1 OUTPUT 9 6 False True DIGITAL_COAX 4090 1 OUTPUT 10 6 False True DIGITAL_COAX 4100 1 OUTPUT 11 6 False True DIGITAL_COAX 4110 1 OUTPUT 12 6 False True DIGITAL_COAX 4120 1 OUTPUT 13 6 False True DIGITAL_COAX 4130 1 OUTPUT 14 6 False True DIGITAL_COAX 4140 1 OUTPUT 15 6 False True DIGITAL_COAX 4150 1 OUTPUT 16 6 False True DIGITAL_COAX 3070 1 INPUT 8 6 True True DIGITAL_COAX 3072 1 INPUT 8 6 True True STEREO 7070 1 Room Selection - OUTPUT 8 7 False True AUDIO_VOLUME 3080 1 INPUT 9 6 True True DIGITAL_COAX 3090 1 INPUT 10 6 True True DIGITAL_COAX 3100 1 INPUT 11 6 True True DIGITAL_COAX 3110 1 INPUT 12 6 True True DIGITAL_COAX 3120 1 INPUT 13 6 True True DIGITAL_COAX 3130 1 INPUT 14 6 True True DIGITAL_COAX 3140 1 INPUT 15 6 True True DIGITAL_COAX 3150 1 INPUT 16 6 True True DIGITAL_COAX 4082 1 OUTPUT 9 6 False True STEREO 3082 1 INPUT 9 6 True True STEREO 7080 1 Room Selection - OUTPUT 9 7 False True AUDIO_VOLUME 4092 1 OUTPUT 10 6 False True STEREO 3092 1 INPUT 10 6 True True STEREO 7090 1 Room Selection - OUTPUT 10 7 False True AUDIO_VOLUME 4102 1 OUTPUT 11 6 False True STEREO 3102 1 INPUT 11 6 True True STEREO 7100 1 Room Selection - OUTPUT 11 7 False True AUDIO_VOLUME 4112 1 OUTPUT 12 6 False True STEREO 3112 1 INPUT 12 6 True True STEREO 7110 1 Room Selection - OUTPUT 12 7 False True AUDIO_VOLUME 4122 1 OUTPUT 13 6 False True STEREO 3122 1 INPUT 13 6 True True STEREO 7120 1 Room Selection - OUTPUT 13 7 False True AUDIO_VOLUME 4132 1 OUTPUT 14 6 False True STEREO 3132 1 INPUT 14 6 True True STEREO 7130 1 Room Selection - OUTPUT 14 7 False True AUDIO_VOLUME 4142 1 OUTPUT 15 6 False True STEREO 3142 1 INPUT 15 6 True True STEREO 7140 1 Room Selection - OUTPUT 15 7 False True AUDIO_VOLUME 4152 1 OUTPUT 16 6 False True STEREO 3152 1 INPUT 16 6 True True STEREO 7150 1 Room Selection - OUTPUT 16 7 False True AUDIO_VOLUME