Video StormCMX1616V (16x16 Video, v2.8) [Serial]Video StormVideo Storm CMX1616V (16x16 Advanced mode, v2.8) (Fast) [Serial]devices_sm/KnoxRS8x8HB.GIFdevices_lg/KnoxRS8x8HB.GIF5/23/2008 5:35:35 PM6/4/2013 2:03:03 PMlua_genDriverWorks
avswitch
serial
True
True
True
0
9600 8 none 1 none 232
16
16
14
14
True
CMX1616V driver \n
Supports independant audio and video switching. \n
RS232 expansion port feature now support, but only for connection to Video Storm switches \n
Driver setup PLEASE READ!\n
1. MUST use version 2.6.0 or higher CMX firmware
2. The Video and Audio selection properties are READ ONLY states
3. Make sure you fully connect all the "connections" used to both inputs AND outputs for VIDEO
4. Make sure you fully connect all the "connections" used to both inputs AND outputs for AUDIO
5. You can also paste the following into in the LUA comman window, then click execute
ExecuteCommand("Read_status")
This will readback from the switch. Check the properties tab next and verify that
Readback config status = OK
6. If you want to save the current switch settings to flash as power on defaults, use this LUA command
sendrs232("CF7F\r")
sendrs232("CF7T\r")
7. The "Enable zone powerdown" property will automatically powerdown each output zone when not in use.
\n\n
Additional Commands\n
Read_status: This will poll the CMX to get the device status and update all properties.
Normally this is not needed since the FP and IR are locked, but can be a useful debug tool.
The Readback config status and Readback avsync status properties are set by this command.
They will transition from CurrentState => waiting => OK or ERROR or TIMEOUT.
OK means functioning properly. TIMEOUT means no response from CMX.
ERROR on config status means the device config is incorrect.
ERROR on avsync status probably means the FP/IR lockout was not engaged. \n
config_switch: You need to execute this action ONCE during setup to configure the switch in the correct mode from the driver. \n
Save_state X: This will save the current input/output/volume settings to flash slot X. This useful for a
quick recall or doorbell/intercom mode.
Recall_state X: This will recall a previously saved state from flash slot X.
Send_serial: This will send a specified generic serial command.
For support in using this driver or to report an issue, contact videostorm@gmail.com\n
Enable zone powerdown
LIST
- On
- Off
Off
false
Readback config status
LIST
- OK
- WAITING
- TIMEOUT
- ERROR
OK
true
Readback AV sync status
LIST
- OK
- WAITING
- TIMEOUT
- ERROR
OK
true
Video select 1
RANGED_INTEGER
0
16
0
true
Video select 2
RANGED_INTEGER
0
16
0
true
Video select 3
RANGED_INTEGER
0
16
0
true
Video select 4
RANGED_INTEGER
0
16
0
true
Video select 5
RANGED_INTEGER
0
16
0
true
Video select 6
RANGED_INTEGER
0
16
0
true
Video select 7
RANGED_INTEGER
0
16
0
true
Video select 8
RANGED_INTEGER
0
16
0
true
Video select 9
RANGED_INTEGER
0
16
0
true
Video select 10
RANGED_INTEGER
0
16
0
true
Video select 11
RANGED_INTEGER
0
16
0
true
Video select 12
RANGED_INTEGER
0
16
0
true
Video select 13
RANGED_INTEGER
0
16
0
true
Video select 14
RANGED_INTEGER
0
16
0
true
Video select 15
RANGED_INTEGER
0
16
0
true
Video select 16
RANGED_INTEGER
0
16
0
true
Audio select 1
RANGED_INTEGER
0
16
0
true
Audio select 2
RANGED_INTEGER
0
16
0
true
Audio select 3
RANGED_INTEGER
0
16
0
true
Audio select 4
RANGED_INTEGER
0
16
0
true
Audio select 5
RANGED_INTEGER
0
16
0
true
Audio select 6
RANGED_INTEGER
0
16
0
true
Audio select 7
RANGED_INTEGER
0
16
0
true
Audio select 8
RANGED_INTEGER
0
16
0
true
Audio select 9
RANGED_INTEGER
0
16
0
true
Audio select 10
RANGED_INTEGER
0
16
0
true
Audio select 11
RANGED_INTEGER
0
16
0
true
Audio select 12
RANGED_INTEGER
0
16
0
true
Audio select 13
RANGED_INTEGER
0
16
0
true
Audio select 14
RANGED_INTEGER
0
16
0
true
Debug Mode
LIST
- Off
- Print
- Log
- Print and Log
Off
false
Read_status
Read device status over RS232
Configure_switch
Send switch config commands
Send_serial
Sends given serial command
Cmd
STRING
Save_state_X
Save current Output settings to flash slot X
Slot
RANGED_INTEGER
1
8
Recall_state_X
Recalls Output settings from flash slot X
Slot
RANGED_INTEGER
1
8
5001
1
AVSWITCH
2
False
False
AVSWITCH
1
1
Serial RS-232
1
True
True
RS_232
2
1
Serial RS-232 output (9600/8/1/0)
1
False
False
RS_232
4000
1
OUTPUT 1
6
False
True
DIGITAL_COAX
2000
1
OUTPUT 1
5
False
True
COMPONENT
3000
1
INPUT 1
6
True
True
DIGITAL_COAX
1000
1
INPUT 1
5
True
True
COMPONENT
7000
1
Room Selection - OUTPUT 1
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4010
1
OUTPUT 2
6
False
True
DIGITAL_COAX
2010
1
OUTPUT 2
5
False
True
COMPONENT
3010
1
INPUT 2
6
True
True
DIGITAL_COAX
1010
1
INPUT 2
5
True
True
COMPONENT
7010
1
Room Selection - OUTPUT 2
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4020
1
OUTPUT 3
6
False
True
DIGITAL_COAX
2020
1
OUTPUT 3
5
False
True
COMPONENT
3020
1
INPUT 3
6
True
True
DIGITAL_COAX
1020
1
INPUT 3
5
True
True
COMPONENT
7020
1
Room Selection - OUTPUT 3
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4030
1
OUTPUT 4
6
False
True
DIGITAL_COAX
2030
1
OUTPUT 4
5
False
True
COMPONENT
3030
1
INPUT 4
6
True
True
DIGITAL_COAX
1030
1
INPUT 4
5
True
True
COMPONENT
7030
1
Room Selection - OUTPUT 4
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4040
1
OUTPUT 5
6
False
True
DIGITAL_COAX
2040
1
OUTPUT 5
5
False
True
COMPONENT
3040
1
INPUT 5
6
True
True
DIGITAL_COAX
1040
1
INPUT 5
5
True
True
COMPONENT
7040
1
Room Selection - OUTPUT 5
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4050
1
OUTPUT 6
6
False
True
DIGITAL_COAX
2050
1
OUTPUT 6
5
False
True
COMPONENT
3050
1
INPUT 6
6
True
True
DIGITAL_COAX
1050
1
INPUT 6
5
True
True
COMPONENT
7050
1
Room Selection - OUTPUT 6
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4060
1
OUTPUT 7
6
False
True
DIGITAL_COAX
2060
1
OUTPUT 7
5
False
True
COMPONENT
3060
1
INPUT 7
6
True
True
DIGITAL_COAX
1060
1
INPUT 7
5
True
True
COMPONENT
7060
1
Room Selection - OUTPUT 7
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4070
1
OUTPUT 8
6
False
True
DIGITAL_COAX
2070
1
OUTPUT 8
5
False
True
COMPONENT
3070
1
INPUT 8
6
True
True
DIGITAL_COAX
1070
1
INPUT 8
5
True
True
COMPONENT
7070
1
Room Selection - OUTPUT 8
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4080
1
OUTPUT 9
6
False
True
DIGITAL_OPTICAL
2080
1
OUTPUT 9
5
False
True
COMPONENT
3080
1
INPUT 9
6
True
True
DIGITAL_OPTICAL
1080
1
INPUT 9
5
True
True
COMPONENT
7080
1
Room Selection - OUTPUT 9
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4090
1
OUTPUT 10
6
False
True
DIGITAL_OPTICAL
2090
1
OUTPUT 10
5
False
True
COMPONENT
3090
1
INPUT 10
6
True
True
DIGITAL_OPTICAL
1090
1
INPUT 10
5
True
True
COMPONENT
7090
1
Room Selection - OUTPUT 102
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4100
1
OUTPUT 11
6
False
True
DIGITAL_OPTICAL
2100
1
OUTPUT 11
5
False
True
COMPONENT
3100
1
INPUT 11
6
True
True
DIGITAL_OPTICAL
1100
1
INPUT 11
5
True
True
COMPONENT
7100
1
Room Selection - OUTPUT 11
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4110
1
OUTPUT 12
6
False
True
DIGITAL_OPTICAL
2110
1
OUTPUT 12
5
False
True
COMPONENT
3110
1
INPUT 12
6
True
True
DIGITAL_OPTICAL
1110
1
INPUT 12
5
True
True
COMPONENT
7110
1
Room Selection - OUTPUT 12
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4120
1
OUTPUT 13
6
False
True
DIGITAL_OPTICAL
2120
1
OUTPUT 13
5
False
True
COMPONENT
3120
1
INPUT 13
6
True
True
DIGITAL_OPTICAL
1120
1
INPUT 13
5
True
True
COMPONENT
7120
1
Room Selection - OUTPUT 13
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
4130
1
OUTPUT 14
6
False
True
DIGITAL_OPTICAL
2130
1
OUTPUT 14
5
False
True
COMPONENT
3130
1
INPUT 14
6
True
True
DIGITAL_OPTICAL
1130
1
INPUT 14
5
True
True
COMPONENT
7130
1
Room Selection - OUTPUT 14
7
False
True
AUDIO_SELECTION
VIDEO_SELECTION
2140
1
OUTPUT 15
5
False
True
COMPONENT
1140
1
INPUT 15
5
True
True
COMPONENT
7140
1
Room Selection - OUTPUT 15
7
False
True
VIDEO_SELECTION
2150
1
OUTPUT 16
5
False
True
COMPONENT
1150
1
INPUT 16
5
True
True
COMPONENT
7150
1
Room Selection - OUTPUT 16
7
False
True
VIDEO_SELECTION